The weaving machine is a common textile machine, which is used to weave various fabrics and produce various clothes, shoes and hats, and other daily necessities. Although the performance of the knitting machine is stable, various failures will inevitably occur during long-term use, which needs to be eliminated. The following Xuzhou Qixing Machinery Co., Ltd. will introduce the attention details of knitting machine troubleshooting in detail.
1. Maintenance should be in place
In the use of the braiding machine, it is necessary to pay attention to maintenance work, strengthen cleaning, replace parts in time, and keep the machine in good condition, which can effectively avoid the occurrence of failure. After the machine is stopped, the machine should be cleaned, especially in the machine’s line, transmission part, spindle and other places, it is better to use special tools for meticulous cleaning.
2. Pay attention to details when debugging
When debugging the braiding machine, it is necessary to pay great attention to some details, including the adjustment of the coil, the working status of the heater, etc., and carry out detailed inspection. If it is found that the coil is not adjusted properly, it should be fine-tuned to avoid bias and other conditions. In addition, when testing the braiding machine, it is necessary to pay attention to the temperature of the heater to prevent damage to components caused by excessive temperature.
3. Troubleshooting requires a step-by-step approach
When troubleshooting the braiding machine, it is necessary to have a step-by-step method, from simple to complex, to check step by step to determine the point of failure. First check the normality of the power supply, then check whether the connecting wire is loose, and then determine whether the components are short-circuited, etc. Only by step-by-step inspection and elimination can the fault point be determined and correct maintenance operations be carried out.
4. Pay attention to safety issues
The maintenance and troubleshooting of braiding machine need to comply with safety regulations to ensure the personal safety of operators. When operating the braiding machine, strictly abide by the operating procedures, especially when touching electrical components, it must be done under power-off conditions to avoid electric shock accidents. If it is necessary to replace components, it must be carried out in strict accordance with the regulations.
In the process of troubleshooting the braiding machine, it is necessary to pay attention to the above problems, strictly abide by the operation specifications, and gradually troubleshoot the problems after checking them to ensure the effectiveness of the troubleshooting. In order to make the braiding machine have better work efficiency and service life, it is necessary to strengthen daily maintenance to avoid damage and failure caused by long-term use.
