A ribbon loom is a common textile equipment, which can be used to produce ribbons and strips of various widths, and is mostly used in clothing, home textiles, luggage, backpacks, and other industries. Due to some reasons such as improper maintenance or operation errors in the working process of the ribbon loom, some failures of the machine will occur. The following are the common failures and prevention methods of the ribbon loom.
一、Tire slip
Tire slippage is one of the common failures of weaving machines. This situation is generally caused by the tires being wet or the rubber aging. The way to prevent this is to regularly check the tires for wear and replace them if necessary. At the same time, when using the weaving machine, keep the ground dry and avoid getting the tires wet.
二、Too tight weave
Over-tight weaving of the ribbon loom is a common fault, usually due to improper adjustment of the winch of the ribbon loom, damage to the winch cable, etc. The way to prevent this situation is to regularly check the adjustment of the winch and replace the winch cable in time.
三、Mesh misalignment
Mesh misalignment is one of the common failures of ribbon looms. This situation is generally due to incorrect net pulling operation, excessive vibration of the machine, and excessive use of the machine for a long time. The way to prevent this situation is to operate the net correctly, keep the machine running smoothly, check all parts of the machine regularly, and replace damaged parts in time.
四、Uneven machine weaving
Uneven machine weaving is one of the common failures of ribbon looms. This situation is generally due to improper mechanical adjustment of the winch, embossing, etc. of the loom or unbalanced tension of the webbing. The way to prevent this situation is to keep the machine clean, check all parts of the machine regularly, and adjust parameters such as winch and tension to make them reach a reasonable state.
五、Thread cleaning is not timely
Xuzhou Qixing Machinery Co., Ltd. pointed out that untimely cleaning of thread ends is one of the common faults of ribbon looms. This situation is generally caused by excessive accumulation of dust and debris inside the thread and machine, and increased friction. The way to prevent this is to clean the inside of the machine in time, replace the filter regularly, and keep the machine clean.
六、The appearance of the webbing does not meet the requirements
The appearance of the ribbon does not meet the requirements is one of the common faults of the ribbon loom. This situation is generally due to improper mechanical adjustment of the loom, unbalanced winch tension, and other reasons. The way to prevent this situation is to adjust the tension of the winch, strengthen the maintenance of the machine, and keep the machine running normally.
七、The loom is noisy
The loud noise of the ribbon loom is one of the common faults of the ribbon loom. This situation is generally due to the unbalanced operation of the machine, too many sundries inside the machine, etc. The way to prevent this situation is to maintain the machine regularly, clean up the dust and debris inside the machine, keep the machine in normal operation, and reduce noise.
In the process of using the ribbon loom, the above failures may occur, but as long as we pay attention to the maintenance and maintenance of the machine, we can achieve twice the result with half the effort. At the same time, during the use of the ribbon loom, we also need to pay more attention to the operation and details of the machine to avoid unnecessary operational errors.