In the process of using and maintaining the high-speed braiding machine, attention should be paid to the motor rotor fixing bracket, sliding seat, and other components, especially when installing and maintaining the assembly line, try to ensure the distance between the sliding seat and the lower spindle braiding line.
Xuzhou Qixing Machinery Co., Ltd. recommends placing a sliding frame and the upper spindle to operate on the sliding turntable so that the lower anchor knitting line will not be hooked or broken by the sliding frame when it is pulled from the swing bar to the hand knitting point.
- Warp tension control: The warp yarns are inconsistent in length from the opening to the relative height and in the head. Since the glass fiber basically has no expansion and contraction, the high-speed knitting machine needs to use an appropriate warp tension control system such as a stone mill tensioner to control the bearing capacity of the pure cotton yarn.
- Detailed edge structure of textiles: using shuttle loom structure; spinning tension control is crucial.
- The thickness and width of the fabric: Considering that the thickness will be damaged during the beating process, it is necessary to ensure that the opening is clear, and the movement height of the high-speed knitting machine needle needs to have sufficient embedded parts.
During rough adjustment, the high-speed braiding machine puts the motor rotor on the two adjacent outer spindle fixing brackets, pulls the braiding line to the hand-knitting point according to the swing bar, and folds it tightly. When the braided wire enters or exits from the notch in the sliding turntable track, the distance from it to the edge of the upper spindle carriage is basically the same as possible.