The knitting machine is a simple and highly operable device. It is driven by a motor controlled by a computer to automatically select among the feeding nozzles, making it easy to weave mixed-color patterns. The knitting machine below will introduce to you the stable operation specifications of the knitting machine.
- Before starting the knitting machine, the operator needs to check whether the protection equipment of the knitting machine is intact and deal with the problems found properly.
- During the operation of the knitting machine, it is not allowed to oil the operating part, wipe the equipment, transfer goods on the equipment or perform any maintenance work.
- When using the knitting machine, do not touch the rotating part of the knitting machine with force and other objects, and do not lean your body against the equipment. Pay attention to the personal protection problems of personnel.
- During the production process, if any abnormalities or accidents are found in the knitting machine, it must be shut down immediately to solve the problem, and the work can be started after the processing is completed.
- Never place tool dirt on the knitting machine. Objects should not be placed around the weaving machine, the safety channel of the weaving machine should be kept unblocked, and the waste silk of the drum should be placed in the designated position.
A weaving machine is a machine used for weaving. Due to the continuous and rapid development of the whole society and the rapid development of technological innovation, the performance of machinery and equipment is continuously improved, and the user experience is more obvious; Now everyone’s demand for main materials is getting higher and higher, which also makes it difficult for the original machine to meet the requirements of the public. The current knitting machine has high efficiency, stable operation, and long application time. Below, the knitting machine manufacturer will introduce the whole process of daily maintenance of the knitting machine in detail.
- Check whether the lubrication in the knitting machine housing is within the specified range, pick up the oil detection device to ensure that the remaining oil is in the center of the two lines, but do not spray too much lubricating oil.
- The lubricating oil of the turbo housing of the knitting machine can be checked visually through the oil sight glass. If it is less than half of the oil mirror, add lubricating oil.
- Before the start of each shift, lubricate the centrifugal impeller and shaft midpoint of the knitting machine, and clean the cabinet countertop to prevent dirt from blocking the moving spindle.
- All gear shafts of the knitting machine should be lubricated and maintained as much as possible.
- Lubrication and maintenance of the light components of the optical sensor cable guide of the knitting machine.
- Make sure that there are no obstacles within the range of the knitting machine posture.
- Tighten the screws of the transmission system of the knitting machine and the connecting parts to prevent loosening and affect the operation of the equipment.
- Before operation, please run the knitting machine at low speed for about 5 minutes, and then increase the speed.