The high-speed knitting machine is a knitting machinery experimental instrument. Some machines will cause various problems due to the length of application time and whether the operation steps are reasonable. Maintenance and maintenance, check whether there are any malfunctions in the mechanical equipment in advance, and repair them in time. What are the common damage locations of weaving machinery? Let me give you a detailed introduction.
High-speed knitting machine maintenance inspection specific content:
- Check whether the lubricating oil in the main chassis is within the specified range, take out the oil probe and lower it to ensure that the remaining oil is in the middle of the two lines, but not too much to prevent the lubricating oil from spraying out.
- To check the lubricating oil of the turbine box, it should be estimated by the oil mirror, and the lubricating oil should be filled when it is less than half of the oil mirror.
- All gear shaft parts of the machine should be properly lubricated and maintained once a week.
- Carry out proper lubrication and maintenance on the main rod part of the polished rod cable arrangement, once a week.
- Make sure that there is no obstacle within the range of equipment movement, and check it anytime and anywhere.
- Tighten the screws of the machine’s transmission system and connecting parts to prevent loosening from affecting the operation of the machine, and check it once a week.
- Before the actual operation of the machine, run it in low gear for about 5 minutes and then increase the speed.