Nowadays, weaving equipment has been successfully used in many places, usually professionally used for weaving clothing, but it is worth mentioning that its long-term use will inevitably cause some damage or failure, so do a good job every day Both major and minor repairs are necessary, and there are some important aspects that we need to keep in mind.
During the overhaul, all mechanical parts should be disassembled, thoroughly cleaned, repaired damaged parts, removed parts beyond the service life, and then carried out all-around installation and adjustment according to overhaul regulations. Overhaul usually occurs when the large circular knitting machine is normal. It has been in operation for about 96 months.
At the same time, the specific purpose of key maintenance is to eliminate the dust and flying flowers on various parts of the mechanical equipment, clean the knitting parts and replace the damaged knitting needles, etc. After about 6 months of normal operation, it is necessary to carry out important maintenance on the braided components of the equipment.
The knitting speed of the knitting machine is an important parameter that the general public is very concerned about. For knitting machines with the same performance specifications, of course, the faster the knitting speed, the better. Let’s take a look at the key points that generally affect the speed of the knitting machine What are the factors?
一、Speed ratio: The faster the speed ratio of the high-speed knitting machine, the faster the number of knitting circles completed per unit of time, and of course the faster the knitting speed. The reason for limiting this speed at this stage is related to the quality of the motor and the performance of the weaving raw material.
二、Pitch: The larger the pitch between the braided layers, the smaller the number of braided layers per unit length, and the faster the speed. In order to ensure the quality of the braided plastic hose, it is necessary to ensure that the pitch is in the middle of the braided layer, pitch The smaller the pitch, the denser the braided layer and the better the performance of the braided tube.
三、Management: Under the same weaving quality requirements, the larger the pipe diameter, the faster the weaving speed; when we buy a weaving machine, we can not only look at the weaving speed of the weaving machine but also need to look at the weaving quality, only high efficiency and quality The knitting machine is a good knitting machine in everyone’s mind.