- High-quality parts, and effective organization, make the knitting machine run more smoothly and last longer.
- Unique design, simple operation and maintenance, and convenient and convenient maintenance of equipment.
- The high-speed knitting machine is easy to break and not easy to damage the surface of the raw material during weaving. After weaving, of course, it has a higher quality. If there is a product with a core, it can be fed automatically, regardless of whether the core is large or small. Usage amount.
- At the outlet point of the Yanluo spindle group, the equipment hangs in the industrial-grade porcelain eye (aluminum oxide) instead of the hole-breaking work. The effective structure of the Yanluo spindle makes it easier to replace the bobbin and adjust the elasticity.
- The fully automatic yarn-breaking and power-off equipment of the high-speed knitting machine is convenient and accurate. When the core is used up or disconnected, the equipment will stop running automatically, so the equipment can be operated safely without human control, to increase production and control costs.
- The motor adopts frequency conversion control, infinitely variable speed, easy to control the ratio of speed to speed, and can be overweight for maintenance.
- Standard parts supplement and sound after-sales maintenance service will give a strong guarantee for the normal operation of your equipment.
- High-quality, high-speed operation, high quality, which will give you a larger indoor space.
Some components of high-speed braiding machines such as.
Spindle support frame, sliding seat, etc., after maintenance and disassembly or when adjusting new parts and reinstalling, be sure to ensure the correct distance between the sliding seat and the braiding line of the lower spindle. It is suggested to place a sliding frame and the subordinate upper spindle to run on the sliding wheel so that when the braiding wire of the lower anchor is led from the swing rod to the weaving point, it will not be hooked or disconnected by the sliding frame.
Common problem.
During rough adjustment, place the spindles on the adjacent two outer spindle support frames, guide the braiding wires to the braiding point according to the swing bar, and stack them tightly. When the braiding wire enters or exits from the slot on the sliding reel rail, its distance to the edge of the upper spindle carriage must be approximately the same. The adjustment of the distance can be accomplished by switching the gear frame forward or backward by one or more gears. If you can’t adjust the distance accurately by moving one tooth, you can adjust it according to the following steps: Loosen the five fixing screws on the internal gear, because the buried hole is elliptical, and the sliding frame can be realized by moving the internal gear Adjustment, adjust in time and then tighten the screw. Press the other sliding frames evenly on the sliding ring rail. If the swing height of the braided wire is different after the new swing rod is installed, it should be adjusted until all the swing rods have the same endpoint.
In the process of using the high-speed knitting machine, many faults occur due to incorrect operation.
- Coil tension sensor: The length of the bobbin is inconsistent from the opening to the maximum height and the head, because the glass fiber basically has no stretching amount, so it is necessary to use a reasonable bobbin tension sensor system software such as a stone roller tensioner to control the yarn support force.
- The detailed side structure of the textile: select the structure of the shuttle loom; the spun yarn tension sensor is the key.
- The thickness and width of the fabric: Considering the influence of the thickness in the beating-up process, it is necessary to ensure that the opening is clear, and the height of the shuttle movement must be pre-embedded enough.