Many customers have asked this question, just careful maintenance can increase the service life of the knitting machine, it is very likely that some good friends want to say that is so simple, in fact, it is easier said than done, in people’s daily life There are many behaviors that are not advisable. Let’s take a look at what practices are expressly prohibited.
It is forbidden to spread smoke and dust compounds around the spindle, such as using light calcium powder to absorb oil spills and oil splashes.
When the spindle rod-disk assembly is pulled out and the spindle seat is inserted again, the lower cone of the spindle must be wiped with a lint-free cloth to avoid contamination of fibers, flowers, scraps, and dirt.
The spindle base is stored independently or installed in the car. When the spindle rod and disc fusion parts are not inserted, use a clean plastic film to cover the part of the bearing hole of the spindle base to prevent dust, flowers, and dirt from falling into the inner wall of the spindle base.
Seriously do a good job in the “three concentric” work of the spindle, steel collar, and yarn guide hook.
The spindle is installed in the dragon tendon hole. While the radial direction is vertical and the positioning is reliable, it is stipulated that the center line of the spindle rotation, the core of the steel ring, and the center of the guide hook are concentric, also known as “three concentric” (if equipped with The balloon ring is “four concentric”). Doing this work well is extremely important for stabilizing yarn support, normal balloon shape, stabilizing spindle vibration, reducing broken wires, reducing hairiness, and improving yarn quality, so it must be done seriously. If one of the three spindles, steel collars, and yarn guide hooks is not concentric, the spindle will have a crooked spindle, a crooked balloon, uneven textile support, dizziness, increased spindle vibration, and a significant increase in hairiness, the yarn quality is reduced.
Common problem.
- Before starting, make sure that the machine is stable and can not start working without shaking, so as not to affect the use of the machine and production quality.
- Oil should be supplied at least once in each shift to ensure that the running components have sufficient operational flexibility to prevent the components of the transmission system from being overheated or damaged at abnormal speeds and reduce the service life of the equipment.
- Properly handle the broken wires and dirt on the equipment to prevent them from being brought to the fuselage by rotating components, causing the equipment to fail to turn or causing the dial to shift and cause the spindle to move and get stuck, seriously affecting the service life of the equipment and the quality of manufactured products question.