一、The high-speed braiding machine should strictly implement the quality management regulations in the weaving process, carry out production and manufacturing, strictly implement the process card requirements issued by the company to the equipment of the fast rope braiding machine production workshop, control the process parameters, and make good inspection records.
二、The clipping mark of the high-speed braiding machine cable In the working stage of the fast rope braiding machine, a complete wire reel requires one end. If there is a connector inside that needs to be broken, the reason must be marked in the middle of the mark and noted. The length of the first half of tomorrow.
三、The high-speed knitting machine suddenly stops during the weaving process, and the rope knitting machine suddenly stops during the weaving process.
四、The shielding layer of the high-speed braiding machine does not meet the requirements. In the process of knitting, if the rope braiding machine finds that the shielding layer that has been braided does not meet the requirements, it should be stopped at any time to eliminate the braiding of the iron wire at this distance. When you’re done, go back to braiding.
Tips for knitting machine maintenance:
- It is clear that the knitting machine is relatively stable before running the machine, and does not work erratically, so as not to affect the use and production quality of the machine.
- At least once in each shift ensure that the moving components have sufficient operational flexibility to prevent abnormal heat from occurring or speeding up the part and shorten the service life of the equipment.
- Properly dispose of the broken wires and dirt of the equipment to prevent the rotating parts from entering the equipment or causing the lever shaft to be stuck, which will seriously affect the service life of the equipment and the quality of the manufactured products.
- The fast knitting machine immediately corrects abnormal parts to ensure the quality of production.
- Tighten every screw and nut of the equipment on time to ensure the reliability of the operation, in case of abnormal noise and living equipment.
- Properly control the output frequency of the frequency converter so as not to affect the life of the equipment.
- The drive chain is lubricated to prevent oil from entering the friction plate and tightening it, causing the friction plate to deviate and affect the unwinding structure.