When we use a braiding machine to braid cables, some common faults may occur. When faults occur, we should deal with them rationally. Therefore, it is necessary for us to master some common faults of braiding machines. The braiding machine of Xuzhou Qixing Machinery Cable Company is here to share with you how to deal with the phenomenon that the braiding machine stops during the process of braiding cables.
The equipment suddenly stops during the knitting process because it is disconnected or the threads are used up. After corresponding processing is done, knitting can be started again.
During the editing process, if you find that the woven surface does not meet the requirements, you should stop the machine at any time and at the same time reverse the motor to eliminate the weaving of the wires over this distance. After the treatment is completed, resume weaving.
Strictly implement the requirements of the process cards issued to the workshop equipment, control the process parameters, and keep inspection records.
A complete winding reel requires one end. If there is a connector inside that needs to be broken, a 30cm long non-proof cloth strip must be tied in the middle of the mark to indicate the reason and the length of the front end. For example, there are many kinds of connectors in the reel. The specifications and models are put together, and the product specifications, specifications, models, and length should be indicated from the inside to the outside.
The lines must be neat and tight, and there must be no cross-over conditions.
Strictly implement the requirements of the process cards issued to the workshop machines and equipment, control the process parameters, and make inspection records.
Cables are an important medium for the production and consumption of electricity in our daily lives. They play a very important role in the construction and application of power grids. Only by doing a good job in quality control of the braiding machine during the cable production process can we produce products that meet the requirements. , Reduce unnecessary trouble in the middle and later stages.