At present, the standards of all walks of life are getting higher and higher, and many people attach great importance to the difficulty of contamination resistance of machinery and equipment. This is true for conductive tape knitting machines. To create excellent work, it is very important to pay attention to cleaning the inner cavity of the spindle holder and the surface of the spindle. The adhesion and entry of any dust, fiber, or dirt will aggravate the damage to the spindle. As a result, the service life will be reduced, so we recommend that you:
- It is strictly forbidden to sprinkle dusty substances near the spindle of the conductive tape braiding machine, such as using light calcium powder to absorb oil leaks and oil splashes.
- Pull out the spindle rod-disc fusion piece of the weaving machine and insert it into the front of the spindle holder. Try to wipe the lower cone of the spindle with a velvet cloth to prevent synthetic fibers, fly flakes, silk waste, and dirt.
- When the spindle holder of the conductive tape braiding machine is stored or assembled on the vehicle, when the spindle rod-disk fusion piece is not inserted, a clear plastic film should be used to cover part of the roller bearing hole of the spindle holder to prevent dust, flowers, and dirt from falling into the spindle holder. lumen.
- The conductive tape knitting machine carefully performs the “three concentric” work of spindle, steel collar, and yarn guide hook.
The spindle of the conductive tape braiding machine is assembled in the rib hole. In addition to being vertical in the axial direction and reliable in positioning, the spindle rotation dividing line, the steel ring management, and the yarn guide hook management are required to be concentric, also known as “three concentric” (if equipped with The balloon ring is “four concentric”). Doing this kind of work well is key to stabilizing the yarn endurance, maintaining a normal balloon shape, stabilizing the spindle vibration, reducing breakage, reducing weft yarns, and improving the yarn quality. Do it as carefully and carefully as possible. If one of the three components of the spindle, steel ring, and yarn guide hook is not congruent, the spindle will have a crooked spindle and a crooked balloon, resulting in uneven cotton textile bearing capacity, dizziness, intensified spindle vibration, and obvious lifting of the weft yarn. , the yarn quality is reduced.
It can be seen that doing a good job in contamination resistance of the conductive tape braiding machine will help extend the service life of the braiding machine. Therefore, everyone must do a good job in cleaning the inner cavity of the spindle base of the braiding machine and the surface of the spindle.