Maintenance methods of high-speed braiding machine:
- Check whether the lubricating oil in the main chassis is within the required standard. Take out the oil probe and lower it to ensure that the remaining oil is between the two lines, but not too much to prevent the lubricating oil from spraying out.
- Check the lubricating oil in the turbocharger tank, which can be estimated by the oil mirror. If the lubricating oil is less than half of the oil mirror, add lubricating oil.
- All gear shaft parts of the machine should be properly lubricated and maintained once a week.
- The polished rod part of the polished pole cable arrangement should be properly lubricated and maintained once a week.
- Make sure there are no obstacles within the equipment’s position and check at any time.
- Tighten the screws in the machine’s transmission part and connection parts to prevent loosening from affecting the machine’s operation. Check once a week.
- Before the actual operation of the machine, it should be run at a low speed for about 5 minutes and then increase the speed.
Prevention methods:
- Replace with new yarn tube;
- Part of the yarn is broken or disconnected;
- Aluminum platinum terminated or no aluminum platinum;
- The cored wire is interrupted or there is no cored wire;
- The power-off dial is stuck and cannot be returned;
- Check whether the sensor’s magnetic induction is normal.
Main uses of high-speed braiding machines:
Mainly used to weave various ring or flat inelastic and elastic ropes, mainly for weaving various ropes, sports shoelaces, wide and tight belts, decorative belts, high-tension belts, fishing net lines, fishing Lines, trailer ropes, ship ropes, curtain ropes, cables, chemical fibers, and other high-quality products.
High-speed braiding machine features:
- Frequency conversion type stepless speed change, flexible stopping of yarn breakage, synchronous feeding of core spun yarn, control of core spun yarn breakage, low energy consumption, and high return.
- The machine’s stock plate has been specially seasoned to improve its wear resistance, and important parts have undergone unique heat treatment processes and ultra-deep processing to ensure long service life.
- The machine equipment has high operation reliability, is very easy to maintain, and is convenient to use.
- It occupies a small area and saves indoor space.
- The actual operation of the control panel of the household appliance box is simple and easy to understand.
- Application cables: stainless steel wire, copper wire, electroplated tin wire, silk-covered wire, nickel-plated wire, braided wire, carbon fiber material, pure cotton yarn, and other raw materials.