High-speed braiding machines are customized and manufactured on demand, which also meets some of our humane requirements for facilities. Whether it is product appearance, color, or product technical specifications, they will be customized according to needs. Visiting and inspecting our production workshop, from giant models of several meters high to desktop small and medium-sized braiding machines, we are all strengthening customer satisfaction and the core concept of customized production and manufacturing.
- Check whether the lubricating oil in the main chassis is within the required standard. Take out the oil probe and lower it to ensure that the remaining oil is between the two lines, but not too much to prevent the lubricating oil from spraying out.
- Check the lubricating oil in the turbocharger tank of the aramid fiber braiding machine, which can be estimated by the oil mirror. When the oil mirror is less than half of the oil mirror, the lubricating oil must be added. (Do not overdo the oil lens when replenishing).
- The impeller and axis of the three-dimensional braiding machine are lubricated before each shift starts and the countertops are scrubbed clean to prevent debris from blocking the spindles.
- All gear shaft parts of the high-speed braiding machine should be properly lubricated.
- The polished rod part of the glossy cable arrangement needs to be properly lubricated.
- Make sure there are no obstacles within the equipment’s position.
- Tighten the screws in the drive system and connection parts of the high-speed braiding machine to prevent loosening from affecting machine operation.
- Before the actual operation of the high-speed braiding machine, it should be run at low speed for about 5 minutes and then increase the speed.