1. Rotating speed:
The faster the speed of the horizontal braiding machine, the faster the number of knitting circles completed per unit time, and the faster the natural knitting speed. The factors currently limiting this speed are related to the quality of the motor, the performance of the knitting material, and other factors.
2. Pitch:
The greater the pitch between the layers of a horizontal braiding machine, the smaller the number of braiding layers that need to be completed per unit length and the faster the speed. To ensure the quality of the braided hose, the pitch between the braiding layers must be ensured. The smaller the pitch, the denser the braided layer, and the better the performance of the braided tube.
3. Pipe diameter:
Under the same braiding quality requirements, the larger the pipe diameter, the faster the braiding speed.
Therefore, when we purchase a braiding machine, we should not only look at the knitting speed of the braiding machine but also the weaving quality. Only a braiding machine that pays equal attention to efficiency and quality is a good braiding machine in our mind.
Key points that need to be mastered when installing the complete horizontal braiding machine:
- Before installing the composite braiding machine, use a cloth soaked in gasoline or pure kerosene to remove protective materials and dirt from the processing surface of the braiding machine, and be careful not to drop gasoline and kerosene on the painted surface. Then wipe it with a clean cloth Dry and apply clean engine oil to prevent rust.
- The carbon fiber braiding machine must use deep holes for the anchor bolts on the concrete foundation. The depth of the foundation depends on the local geological conditions. For the concrete upstairs, through holes are used. The foundation must be firm to avoid vibration when the braiding machine is working.
- When installing aramid braiding, wedge irons can be used to adjust and a level can be used for alignment. For larger braiding machines with separate bases for the braiding part and the traction part, to facilitate adjustment, adjustment pads can be used for the footings of the braiding part and the traction part. The adjustable feet can be adjusted and calibrated with a spirit level.
- The braiding machine achieves secondary grouting after correction.