Some parts of the high-speed braiding machine, such as the spindle support frame, sliding seat, etc., must ensure the precise distance between the sliding seat and the lower spindle braiding line after maintenance and disassembly or when replacing new parts and reinstalling. It is recommended to first place a sliding frame and the attached upper spindle to operate on the sliding wheel so that the lower hard braided wire is not hooked or cut off by the sliding frame when it is led from the swing rod to the braiding point.
During the rough adjustment of the high-speed braiding machine, place the spindle on the two adjacent outer spindle supports, guide the knitting wire to the knitting point through the swing rod, and stack it tightly. When the braided wire enters or exits the slot on the sliding wheel track, its distance to the edge of the upper spindle sliding frame must be basically the same. The adjustment of the distance can be accomplished by switching the gear rack forward or backward by one or more gears.
To repair a high-speed braiding machine, you first need to understand all the procedures of the knitting machine, so that you can more conveniently repair the braiding machine. The following explains the working procedures of the braiding machine:
- The latch needle loop forming principle and working process of the braiding machine.
- The structural characteristics and weaving principles of various basic textile structures.
- The ring transfer principle and working process of the hollow flower engine.
- Differences and special requirements between braiding machine slip stitch tuck pattern hole cards and knitting jacquard pattern hole cards.
- The needle path settings of universal braiding machines and fully automatic needle selection knitting machines and the role of each needle path in pattern knitting.
- Needle selection principle and performance of hole card type drum trial braiding machine.
- The needle selection principle and performance of the hole card type needle selection built-in braiding machine.
- Different types and models of braiding machines have common fault causes, inspection and diagnosis procedures, and troubleshooting and repair methods.
In order to better maintain the performance of high-speed braiding machines, the equipment must be inspected in accordance with regulations so that abnormalities in the equipment can be detected in advance. The establishment of an inspection system centered on weft inspection is an important method for maintenance work. The so-called maintenance is the inspection and inspection of key parts and items of equipment. Environmental maintenance always highlights the situation, and every part of the equipment in daily operation is inspected every day.