There are more and more reasons why relevant knitting machine manufacturers often break threads. The operation of the equipment should be as smooth and vibration-free as possible. The supporting force of the wires should be kept as consistent as possible, and the density and flatness of the rows should also be very good. The supporting force of manual knitting should not be too large, and the speed should not be too high. If it is too fast, the wire path should be as smooth and coordinated as possible. Generally speaking, the lower spindle is prone to wire breakage. Check the swing rod and its bearings.
- Maintenance inspection content: Check whether the lubricating oil in the main chassis is within the specified range. Lift the oil probe and lower it to ensure that the oil level is in the middle of the horizontal line, but not too much to prevent the lubricating oil from spraying out.
- Please choose No. 32#46 hydraulic oil to check the lubricating oil in the turbocharger tank. It can be estimated by the oil mirror. When it is lower than half of the oil mirror, add lubricating oil.
After disassembling and assembling new parts for maintenance or modification of some components, such as the braiding machine spindle bearing frame, combined bearings, etc., it is necessary to ensure the precise distance between the rolling base and the braiding wire spindle. It is recommended that the operation of the spindle slide closely related to the rotary table be placed on the fixed bracket so that the carriage does not open or close the hook along with the knitting yarn from the pendulum knitting point anchor.
Knitting machines are commonly used in the production process, and the equipment operates for a long time. The static and dynamic deformations of the equipment are changing all the time, causing the partial and system deviations of the tightened or connected parts to gradually expand. Finally, move the relative position of some parts and change the processing spacing.
Xuzhou Qixing Machinery Co., Ltd. checks whether the important process components and fixed connections of each piece of equipment are loose, and tightens the loose parts in time. Standard tightening connectors should be purchased from nationally designated factories. The tightening operation procedures of standard parts should be unified to avoid under-tightening or over-tightening, which may cause errors or shorten the service life of standard parts.
In order to maintain the performance of the equipment, according to the standard equipment inspection, the equipment is initially inspected for abnormal conditions, and establishing a system to check the latitude center is an important method to improve the maintenance work. The so-called inspection is a core part of the equipment and investigation of this project.