Nowadays, knitting equipment has been successfully used in many areas, usually for knitting clothing, ropes, elastic ropes, etc. However, it is worth mentioning that its long-term use will inevitably cause certain damage or malfunctions. , so it is necessary to do some major and minor repairs on a daily basis, and we need to remember some important aspects.
Knitting machine repair is to disassemble and disassemble the parts of the knitting part of the machine, sort and clean them, and replace the parts that are expected to be damaged before the next major repair, and then complete the installation and adjustment according to the minor repair regulations, which takes a lot of time. Generally, it is carried out about 24 months after the braiding machine is in normal operation.
During the overhaul, all mechanical parts should be disassembled and assembled, and thoroughly cleaned, damaged parts should be repaired, parts that have exceeded their service life should be eliminated, and then all-around assembly and adjustment should be carried out in accordance with the overhaul regulations. Overhaul repairs are usually carried out on the normal work of the circular braiding machine. It will run for approximately 96 months.
At the same time, the main purpose of the maintenance is to remove dust and dust from various parts of the machine, clean the knitting parts replace damaged parts, etc. The braiding machine, which mainly uses pure cotton yarn, is in normal operation for 6 In about three months, important maintenance needs to be carried out on the woven components of the machine.
The weaving is mainly based on chemical fiber yarn and can be repaired within about 12 months of normal operation. The specific steps are to remove the impeller, walking spindle, supporting torsion spring, etc., clean the platform, bearings, etc., and then reinstall them. , the horse spindle (horse head, yarn bobbin) is adjusted again until it starts running normally and ensures fabric quality.