Twisted rope braiding machines often break wires during operation. It needs to be determined whether it is torn or stuck. If it is torn, the reason is that the tension is too high. You can adjust the tension or disassemble the spring.
If it is caused by jamming, the spring is too small, so you need to increase the tension immediately, and carefully check whether the upper and lower grips are normal. If there is any damage, you can carefully remove it and use sandpaper to smooth the wound shape and install it.
If the twisted rope braiding machine has parallel threads during use, you should pay attention to the situation at that time. If there are too many broken wires, adjust the tension and brake first. If there are too many broken threads during the parallel threads in the doweling machine, First adjust the tension and brakes in the doweling machine.
When the machine cannot be turned on normally, you should first self-check whether there is any wire entanglement on the parking pole behind the equipment and whether the power switch is normal, and then it can be solved. If there are common problems or the machine cannot be started normally, please find the team leader immediately, explain the reason, discuss the solution with the equipment maintenance worker, and make a record for the next repair and maintenance. The twisted rope braiding machine is operating normally. Add lubricating oil once every 30 minutes, and apply it immediately every time a line is opened.
If a single group often breaks during operation, you should check whether the porcelain eyes on the tension seat are damaged, adjust the tension, and check whether the surrounding surface of the twisted rope knitting machine is damaged or uneven, whether there are gaps, and thoroughly knit the twisted rope machine. Just add lubricating oil if the inside and outside of the machine are dirty, and you cannot force it to start.