A ribbon loom refers to a machine equipment used to make webbing of various widths. Usually, the webbing machine has the ability to adjust the webbing width to meet the needs of different webbing widths. Below Xuzhou Qixing Machinery Co., Ltd. will introduce in detail the working principle of the ribbon loom and how to adjust the ribbon width.
The working principle of the ribbon loom is mainly composed of the following parts: frame, ribbon spindle, ribbon guide device, weft yarn supply device, and ribbon ejection device.
Rack: The main part where the webbing is placed and can be sized as needed. Ribbon spindle: The webbing spindle is the central part used to weave yarn into the webbing. They are mounted on a frame and the distance can be adjusted to accommodate different widths of webbing. Ribbon guide device: The ribbon guide device is mainly used to control the movement trajectory of the ribbon. By adjusting the guide, the width of the webbing can be controlled. Weft supply device: The weft supply device is used to provide yarn to the webbing. Different widths of webbing require different amounts of yarn. By adjusting the weft yarn supply device, the width of the webbing can be controlled. Ribbon pop-up device: The webbing pop-up device is used to peel off the finished webbing from the webbing spindle.
Method to adjust the width of the webbing. To adjust the width of the webbing of the webbing machine, you can follow the following steps:
Adjust the position of the webbing spindles: Adjust the distance between the webbing spindles as needed to adapt to the requirements of different widths of webbing. Normally, the distance between the webbing spindles can be adjusted and controlled by tightening the screws.
Adjust the webbing guide device: The webbing guide device is used to control the movement trajectory of the webbing. Generally speaking, the guide device can be moved and adjusted in angle. By adjusting the guide, the width of the webbing can be controlled. Typically, the guide has a series of scales and markings on it to help accurately adjust the width of the webbing.
Adjust the weft supply device: The weft supply device is used to provide yarn to the webbing. Different widths of webbing require different amounts of yarn. By adjusting the weft yarn supply device, the width of the webbing can be controlled. Generally, there are also a series of scales and marks on the weft supply device to help accurately adjust the width of the webbing.
Check the adjustment results: After adjusting the width of the webbing, testing and inspection are required to ensure that the width of the webbing meets the requirements. You can use a tape measure or ruler to measure the width of your webbing and compare it to your target width. If necessary, fine-tuning can be done until requirements are met.
It should be noted that you need to be very careful when adjusting the width of the webbing to avoid damaging the equipment or affecting the quality of the webbing. It is best to make adjustments when you are familiar with the operation and details of the equipment or operate under the guidance of professionals.
To summarize, ribbon looms are capable of producing ribbons of various widths. The width of the webbing can be controlled by adjusting the position of the webbing spindle, the webbing guide device, and the weft yarn supply device on the frame. Caution is required when adjusting the width of the webbing, and it is best to make adjustments when you are familiar with the equipment and operating details. Through the above method, ribbons of various widths that meet the needs can be produced on the ribbon loom.