Nowadays, braiding machines and equipment have been successfully used in many places, usually specifically for knitting clothing. However, it is worth mentioning that when used for a long time, there will inevitably be some damage or failure, so some major problems must be solved daily. , minor repairs are necessary, and everyone needs to remember some fundamental aspects.
During overhaul, all mechanical parts must be disassembled, thoroughly cleaned, damaged parts repaired, and parts beyond their service life eliminated, and then fully assembled and adjusted by overhaul regulations. Overhaul generally takes 96 months of normal operation of the circular knitting machine. Develop up and down.
At the same time, the main purpose of maintenance is to eliminate dust and flying flowers on various parts of the machine, clean the knitting parts replace damaged knitting, etc. The circular braiding machine with cotton yarn as the main body has been operating normally for about 6 months. , requiring intensive maintenance of mechanically woven components.
The weaving speed of a braiding machine is an important parameter that the general public is very concerned about. For a braiding machine with the same standardized performance, the faster the weaving speed, the better. Next, Xuzhou Qixing Machinery Co., Ltd. will take you to look at the influence on weaving. machine speed factor.
1、Speed ratio
As the rotational speed of the braiding machine becomes faster and faster, the number of knitting turns completed within the company’s time limit becomes faster and faster. Of course, the knitting speed becomes faster and faster. The factors that currently limit this speed include motor quality, knitting material performance, etc. -Determined relationship.
2、Pitch
The greater the pitch between the braided layers, the lower the number of braided stacking layers that must be completed per unit length, and the faster the speed. To ensure the quality of the braided plastic hose, it is necessary to ensure the pitch between the braided layers. Low, the denser the braid, the better the performance of the braided pipe.
3、Management
Under the same weaving quality standard, the more tube warps, the faster the weaving speed. When purchasing a braiding machine, you should not only look at the weaving speed of the knitting machine but also the weaving quality. Only high efficiency and quality can be combined. The braiding machine is the best in my mind.