At present, the standards of all walks of life are getting higher and higher, and many people are paying close attention to the difficulty of stain resistance of machinery and equipment. This is true for conductive tape braiding machines. When doing excellent work, it is very important to pay attention to the cleaning of the inner cavity of the spindle holder and the surface of the spindle. The adhesion and entry of any dust, fiber, or dirt will only aggravate the damage to the spindle. This causes the service life to be reduced. Here we suggest you:
- Conductive tape braiding machines must not sprinkle dust-like substances near the spindles, or use light calcium powder to absorb oil leaks or splashes.
- Pull out the spindle rod-disk fusion piece of the weaving machine and insert the spindle holder into the front. Try to wipe the lower cone of the spindle with a velvet cloth to prevent synthetic fibers, fly flakes, silk waste, and dirt.
- When the spindle holder of the conductive tape braiding machine is stored or assembled on the vehicle, when the spindle rod-disk fusion piece is not inserted, a clear plastic film should be used to cover part of the roller bearing hole of the spindle holder to prevent dust, flowers from flying, and dirt from falling into the spindle holder. cavity.
- The conductive tape knitting machine carefully performs the “three concentric” work of spindle, steel collar, and yarn guide hook.
The spindle of the conductive tape braiding machine is installed in the rib hole. In addition to the vertical axis and reliable positioning, the spindle rotation dividing line, the ring management method, and the yarn guide hook management method are required to be concentric. This is also known as the “three “Concentric” (if it is equipped with a balloon ring, it is “Four Concentric”). Doing this kind of work is key to stabilizing the cotton yarn’s endurance, maintaining a normal balloon shape, stabilizing the spindle vibration, reducing breakage, reducing wefts, and improving the quality of the yarn. It should be done as carefully and carefully as possible. If one of the three components of the spindle, steel ring, and yarn guide hook is not concentric, the spindle will be prone to crooked spindles and crooked balloons, uneven cotton textile bearing capacity, dizziness, increased spindle vibration, and obvious lifting of the weft yarn. , the yarn quality is reduced.
It can be seen that doing a good job in stain resistance of the conductive tape braiding machine will help extend the service life of the braiding machine. Therefore, we must do a good job in cleaning the inner cavity of the spindle base of the braiding machine and the surface of the spindle.