The high-speed braiding machine is a kind of braiding equipment. It mainly uses the spindle to make up and down spiral curves and uniform circular motions along the guiding structure, and braid the steel wire on the vulcanized rubber pipe body and rubber and plastic product pipe body according to a certain regularity, as an improvement. layer, used to increase the working pressure of the pipe body.
High-speed knitting machine structure and advantages:
- The series of steel braiding machines is a high-speed braiding machine developed by our company.
- This machine has the advantage of having a high number of revolutions and more than doubling the working efficiency compared to the general knitting machines in China.
- The operation is simple and high-precision. This machine adopts mechanical automation, an industrial touch screen, and a servo motor to drive the motor, which greatly improves the weaving precision and reduces the difficulty of use by the staff.
- Equipped with the braiding spindle developed by our company, it has the advantages of large tension during construction, stable construction, long service life, high weaving quality, and large thread capacity (double the normal thread capacity during the same period).
- This machine is equipped with an automatic shutdown alarm for no middle glue, an automatic shutdown alarm for broken steel wire, and a fault detection function.
When installing and operating a high-speed knitting machine, key points must be mastered:
- Before installation, use a rag soaked in diesel or pure gasoline to remove protective materials and waste from the processing surface of the knitting machine, and be careful not to drop diesel or gasoline on the painted surface. Then wipe it with a clean cloth and apply it To clean car engine oil to prevent rust.
- For the anchor screws on the concrete base, shallow holes must be used. The basic depth depends on the local stratum conditions. On the roof of the concrete, through holes are used. The base must be strong to prevent vibration when the knitting machine is working.
- Wedge irons can be used to adjust and the level can be aligned during installation. For larger knitting machines with separate bases for the knitting part and the traction belt part, in order to facilitate adjustment, you can use adjustment pads for the feet of the knitting part and the traction belt part. Use adjustable feet for various adjustments and calibrate with a level.
- The flatness dimensional tolerance of the base during installation is <1.0MM/M. The coaxial axial dimension tolerance of the knitting part of the knitting machine with a split base is sf4mm.
- After the knitting machine is calibrated, the secondary grouting is completed.