1、The relative density of the braided layer does not meet the requirements
Because the braiding density is related to the number of braiding spindles, the number of spindles per spindle, diameter, pitch, and fixed knitting angle, the number of spindles, the number of spindles, and the diameter will not change. The larger the pitch braiding angle, the lower the braiding density. Check the braiding pitch. If there are any problems with the pitch and braiding angle, adjust them immediately. If there are any loose ends, missing strands, or small diameters, they should be replenished or replaced in time. Keep the number of spindles, root type straight braiding pitch, and the fixed braiding angle coordinated with each other, and the braiding layers should be relatively consistent. The density is uneven and the strands are unevenly tight.
2、Knitting machine strand tension loss control
Xuzhou Qixing Machinery Co., Ltd. replaces the torsion springs that have lost their elasticity due to long-term use fatigue and adjusts the tension of each strand.
3、Uneven braiding pitch
The number of cable coils wound on the traction pulley is too small, resulting in unstable pairing of the rolling spindle speed ratio and the traction belt harness. Increase the number of cable coils on the brake pulley appropriately to adjust the speed between the two to be stable. There are holes and scars in the braided layer. The thread strands are broken, the doubling tension is unevenly controlled, the winding thread has deposits, the threads are passed crosswise, the dowel threads are unevenly arranged, the spindle tension is not adjusted evenly, the thread strands are unevenly tight and loose, and when the thread strands are broken, the maintenance method is not correct. Reasonably, adjust the parallel tension and the steel nail tension.
The high-speed braiding machine has a kind of rigid wire knitting equipment. It mainly uses the spindle to rotate up and down along the guide structure, and weaves the rigid wire regularly on the rubber hose body and rubber and plastic insulation board body as a lifting layer, used to increase the working pressure of the pipe body. The remote server is mainly used in the weaving industry such as woven rubber hose bodies, rubber and plastic insulation panels, and pipe body protective layers.