The braiding machine often breaks wires during operation. It is necessary to distinguish whether it is torn or stuck. If it is torn, the reason is that the tension is too high. You can adjust the tension or remove the elastic. If it is caused by jamming because the spring is too small, the tension should be increased immediately, and you must carefully check whether the upper and lower grips are normal. If there is any damage, you can carefully remove it and use polishing sandpaper to smooth the wound shape and install it.
Xuzhou Qixing Machinery Co., Ltd. pointed out that when the machine cannot be started normally, it is necessary to self-check whether there is any wire entanglement on the parking pole behind the machine and whether the power switch is normal, and then it can be solved.
If you still cannot start the machine normally due to the above common problems, please contact the team leader immediately, explain the reason, discuss the solution with the mechanic, and make a record for the next repair and maintenance. The knitting machine should be refueled every 30 minutes during normal operation. Oil should be applied immediately after each line is completed.
If one of the groups often breaks during operation, you should check the porcelain eyes in the tension seat, adjust the tension, and check whether the surface of the twisted rope machine braiding machine is damaged or uneven and whether there are gaps, causing the inside and outside of the braiding machine equipment to be dirty. Just add engine oil, but you can’t force it to start.