There are more and more reasons why the twisted rope braiding machine often breaks. The operation of the mechanical equipment should be as stable as possible without vibration. It is suitable to be too fast, and the wire passing path should be as smooth as possible. Generally speaking, it is easy to break the lower ingot. Check whether the swing lever and its bearing, the guide wheel are coordinated, the height of the weaving die, whether the grinding wheel is worn, and whether it is in line with the weaving The tensile strength of metal wire drawing has many relationships, and so on!
The specific content of the maintenance and inspection of the knitting machine:
- Check whether the lubricating oil in the main box of the twisting rope knitting machine is within the specified range, raise the oil probe to ensure that the oil level is in the middle of the two lines, but not too much to prevent the lubricating oil from spraying out, and check once a month.
- Check the lubricating grease of the turbine box of the twisting machine and knitting machine, which should be estimated by the oil mirror, and the grease should be added when it is lower than half of the oil mirror. (It can be higher than the oil mirror when replenishing), and check once a month.
- Centrifugal impeller and pivot parts should be lubricated before the start of each shift and the countertops of the cabinets should be scrubbed clean to avoid discomfort from being stuck and dead geese falling to the spindle, once per shift.
- All the gear shaft parts of the rope twisting machine knitting machine equipment should be properly lubricated and maintained and maintained once a week.
- The main pole of the glossy cable arranger should be properly lubricated and maintained once a week.