Braiding machine is a kind of simple and operable equipment. It is driven by the motor controlled by computer to carry out the automatic selection of the feeding nozzle, so that the compiling of the mixed color pattern is easy. Below the braiding machine to introduce the braiding machine stable operation specifications.
- Before starting the braiding machine, the operator should check whether the protection equipment of the braiding machine is intact and properly handle the problems found.
- In the operation of the braiding machine, it is not allowed to oil the operating part, scrub the equipment, move the goods on the equipment or make any maintenance work.
- When using the braiding machine, do not touch the rotating part of the braiding machine with force and other objects, and do not lean your body on the equipment. Be aware of personal protection problems.
- In the production process, if the braiding machine is found abnormal or accident, need to immediately shut down to solve, after the processing can be carried out in the work.
- Do not put tool dirt on the braiding machine. Objects can not be placed around the braiding machine, braiding machine safety channel should be maintained smooth, roller waste wire to be placed in the designated position.
Because of the continuous rapid development of the whole society and the rapid development of scientific and technological innovation, the performance of machinery and equipment continues to improve, the use of experience is more obvious; The increasing demand for primary materials may have made it difficult for the original machines to meet popular requirements. The knitting machines at the present stage are high efficiency, stable operation and long application time. Below, the braiding machine manufacturer will introduce the braiding machine daily maintenance process in detail.
Check that the lubrication in the casing of the knitting machine is within the specified range. Pick up the oil detecting device to ensure that the remaining oil is at the center point of the two channels, but do not spray too much oil.
You can visually check the lubricating oil of the turbocharged housing of the knitting machine through the oil mirror. If less than half of the oil mirror, should be filled with lubricating oil.
Before the start of each shift, the centrifugal impeller of the knitting machine and the midpoint of the shaft should be lubricated, and the counter top should be wiped clean to prevent dirt from blocking the moving ingot.
All gear shafts of knitting machines are lubricated and maintained as much as possible.
Lubricate and maintain light components of optical induction wirelines of knitting machines.
Make sure that there is no obstruction within the pose of the knitting machine.
Tighten the screws in the drive system and connecting parts of the knitting machine to prevent looseness from affecting the operation of the equipment.
Before operation, please run the knitting machine in low gear for about 5 minutes, then increase the speed.