The knitting machine is a machine for weaving. Due to the continuous and rapid development of society and the continuous development of science and technology, the functions of machines and equipment are constantly improving, and the application effect is becoming more and more obvious; The demand for various components is getting higher and higher, which has also made it difficult for the inherent machinery and equipment to meet our requirements. Today’s knitting machines work with high efficiency, run smoothly, and use for a very long time. Let me introduce them in detail below—the maintenance steps of the next knitting machine.
- Check whether the lubrication in the main box of the knitting machine is within the required standard, take out the oil probe to ensure that the remaining oil is between the two lines, but not too much to prevent the oil from spraying out.
- Check the lubricating oil in the turbocharger box of the knitting machine, which can be estimated by the oil mirror. When it is less than half of the oil mirror, add lubricating oil.
- The centrifugal impeller and shaft center of the braiding machine should be lubricated before starting each shift and the countertops should be cleaned to prevent dirt from getting stuck and falling into the spindle.
- All the gear shaft parts of the knitting machine should be properly lubricated and maintained.
- Carry out proper lubrication and maintenance on the glossy parts of the braiding machine glossy cable guide.
- Make sure there is no obstruction within the range of the knitting machine equipment position.
- Tighten the screws on the drive system and connecting parts of the knitting machine to prevent loosening from affecting the operation of the equipment.
- Before the actual operation of the knitting machine, it should be operated at low speed for about 5 minutes before increasing the speed.