Because the principle of a knitting machine is similar to that of a textile machine, and many parts have similar shapes, they are often confused by everyone. So what is the difference between the two? I will give you a brief detailed introduction below, let’s take a look. !
1. The weaving styles are different:
Textile machines generally only weave patterns with overlapping warp and weft and relatively high density, such as fabrics. The styles that can be produced are relatively single. Generally, they only produce small pieces of plan, which are then reproduced and processed through cutting, stitching, etc. The required shape; the knitting machine can knit many styles, which can be sparse or dense. Generally, the knitted fabric is basically close to the finished product, as long as some accessories are added.
2. Weaving raw materials are different:
Textile machines generally can only weave various cotton ropes, chemical fiber fibers, and the spindle support force is not large; braiding machines can weave cotton ropes, chemical fibers, steel wires, aluminum wires, and various iron wires, etc., and the spindle support force range is very large.
3. The shape is different:
The shape of the weaving machine is generally relatively large, because the fabric has requirements such as the width, and the shape of the knitting machine is very diverse from large to small.
How should the knitting machine be maintained? I believe that many people are paying special attention to this issue. Below I will give you a brief detailed introduction, let’s take a look!
- The knitting machine must tighten every screw and nut of the equipment on time to ensure the reliability of operation and prevent abnormal noises and daily equipment.
- The knitting machine should properly control the output frequency of the frequency converter to avoid affecting the operation of the equipment.
- The transmission chain is lubricated to prevent oil from entering the tension of the friction plate, causing the friction plate to deviate and damage the unwinding mechanism.
- Make sure that the equipment is relatively stable before operation and does not fluctuate during work, so as not to affect the use and production quality of the equipment.
- Properly handle broken wires and dirt in the equipment to prevent the rotated components from getting into the equipment, or causing the lever shaft to get stuck, seriously affecting the service life of the equipment and the quality of the manufactured products.
- The knitting machine immediately detects abnormal parts to ensure the quality of production.