What are the common problems with high-speed knitting machine garments? Xuzhou Qixing Machinery Co., Ltd. will take a brief look at them below.
- The high-speed knitting machine sequentially produces the back piece, front piece, sleeve piece, collar strip, placket strip, etc. The order of surgical suturing: – One shoulder. Upper collar strip. Other shoulder. Upper sleeve piece. Surgical suturing sleeve piece. Novices can wash and dry the back piece first, and measure the specifications accurately. If it fits, just cut the front piece again; if it doesn’t fit, cut the back piece completely, check the density again, and measure the processing technology again.
- Problems encountered when knitting sleeves: Knitting yarn sleeves: If weaved according to the same density calculation process, usually the sleeves will be elongated and slimmed down when knitted, so when knitting sleeves, the transverse density can be 1.05, Longitudinal density0.9, or the density will not change, moderately change the sleeve specifications.
- When knitting yarn in the surrounding environment of the knitting machine, the speed is faster and the thread can flutter. Therefore, make sure that no other items are placed next to the bobbin thread to prevent the thread from hanging. The lines are placed on the ground to increase the distance and facilitate the group qualifying.
- There is no need to rush for quick success. Beginners should first carefully read the instructions for use. After reading it 10 times, start training from a flat stitch. Don’t just start knitting fancy flat-stitch scarves. Once you are proficient in the operation, start with flat stitch crew neck shirts and knit at least 5 pieces. Once you have a certain grasp of the size, you can then knit patterns.
- Self-created operation inspection procedure: This is very helpful. When new looms are not skilled, they often forget some operating procedures and cause errors. For example, forgetting to turn off the thread nozzle often leads to pieces falling; for example, a certain function key Forgetting the settings may lead to knitting errors. Therefore, it is recommended that beginners compile a check process by themselves and check according to the process every time before starting to weave to make sure there are no problems before starting the machine.