There are many reasons why high-speed braiding machines often disconnect. The operation of the equipment must be stable and vibration-free, the yarn support must be consistent, and the density and flatness of the wire rows must be very good. The braid support should not be too large, and the speed cannot be too fast. The wire passing path must be smooth and flexible. Generally, the lower spindle is prone to wire breakage. Check whether the swing rod, rolling bearing, and guide wheel are flexible. The relative height of the knitting mold, whether the mold is damaged, and the tensile strength of the knitting wire drawing are also relatively large. Connect these!
High-speed braiding machine maintenance inspection content:
- Check whether the oil in the main chassis is within the required standard. Take out the oil probe and lower it to ensure that the remaining oil is between the two lines, but not too much to prevent the grease from spraying out.
- Check the grease in the turbocharger box, which can be estimated by the oil mirror. If the oil mirror is less than half of the oil mirror, add grease. (Do not over-oil the lens when filling).
- The impeller and shaft should be lubricated before the start of each shift and the countertops should be wiped clean to prevent dirt from blocking the spindle.
- All gear shaft parts of the machine should be properly lubricated and maintained once a week.
- The polished rod part of the glossy cable arrangement should be properly lubricated and maintained once a week.
- Make sure there are no obstacles within the equipment position range and it can be checked at any time.
- Tighten the screws in the machine’s transmission part and connection parts to prevent loosening from affecting the machine’s operation. Check once a week.
- Before actual operation, the machine should be run at low speed for about 5 minutes.
Advantages of high-speed braiding machines:
- High-quality parts and effective organization make this machine run more smoothly and have a longer service life.
- Personalized design, simple operation and protection, and easy and convenient maintenance of the equipment.
- It is easy to break when using a high-speed knitting machine and will not damage the surface of the raw material. After weaving, it will of course be of higher quality. If there are products with a core, automatic feeding can be used, and the appropriate amount can be delivered regardless of whether the core is large or small.
- The effective structure of the Yanluo spindle is to install a hanging industrial-grade porcelain eye (aluminum trioxide) at the exit point of the Yanluo spindle group to replace the hole-breaking work, making it easier to replace the yarn tube and adjust the elasticity.
- The machine’s fully automatic yarn and power-off equipment is convenient and accurate. When the core bag is used up or disconnected, the machine will stop running on its own. Therefore, even if no one is actually operating it, the machine can run with peace of mind to increase production volume and control costs.
- The motor adopts variable frequency control and stepless speed control, which makes it easy to control the speed ratio and can be maintained under heavy load.
- Standard parts supply and comprehensive after-sales maintenance services will provide a strong guarantee for the normal operation of your machine.