During the operation of the braiding machine, the motor may sometimes fail to operate. There is no need to worry at this time. We can follow the following steps to eliminate possible faults gradually.
- Check whether there is a problem with the wiring of the switching power supply circuit: the main reason why the motor cannot work normally is that the power cord plug is not connected due to carelessness. You can solve the problem by just plugging in the power cord plug;
- Is the gas leakage power switch tripping? Check the gas leakage power switch and calibrate it;
- Is the overcurrent protector tripping? Just check the main power switch and calibration of the overload protection device;
- Whether the automatic maintenance is a short circuit fault: check the automatic maintenance route and calibration;
- Is the broken wire setting normal? Check the broken wire setting, check whether there is a broken wire, and check whether the fault is normal.
If the reason for the standby of the textile machine cannot be found according to the internal inspections, then you must contact the manufacturer immediately for further troubleshooting.
For highly customized knitting machines, the standards for each layer are higher than those for general braiding machine manufacturing. This puts great pressure on the company’s new product development, manufacturing, and other fields. At the same time, it also puts a lot of pressure on the company’s new products. An assessment in various fields such as development and manufacturing. Due to its high accuracy and difficult application environment, the diagnostic and treatment tube must be immediately applied to the human body. The next step of this order will also be a great test for the company.
Compared with single-needle knitting, double-needle knitting has more layers, and each layer can be knitted from a variety of materials, making the braided tube more explosion-proof. The two-layer braiding process also facilitates the use of the braided tube. It has better wear resistance.