For a manufacturer, it often has its own testing system for products. The high-speed knitting machine will often stop due to various reasons during the operation process, which will damage production efficiency. If there is a defect in the fabric, it must be stopped for inspection. Do you know what causes the problem with the weaving machine? Let’s introduce it below.
The occurrence of downtime defects on textiles is unacceptable. We have been working hard to reduce such downtime defects. Generally, the causes of defects in high-speed knitting machines are diverse. Xuzhou Qixing Machinery Co., Ltd. pointed out that high-speed knitting machines As the programming speed increases, the probability of such defects will also increase.
The Research Office of the Downtime Defect Detection System organizes the R&D and design of the downtime defect detection system for warp-knitted fabrics. This project begins with research on the starting marks of knitted fabrics. The analysis becomes possible.
Weaving machine textile downtime defect detection system: under the condition of weaving, the defects are caused by downtime. Under normal circumstances, sudden shutdown and restart, as well as restart after long-term shutdown, will cause these failures. The stop defect presents a striped pattern on a large surface of the textile, that is, the pitch of the magnetic coil column changes at this pattern.
The whole process of the detection system is based on image processing. The high-speed knitting machine is based on the characteristics of the sample by using punched cards and tapes. The size of the punched card can be changed, and it can be changed to a specification that depends on the weaving specification and the shutdown defect. In the process of obtaining the defect characteristics, it is not easy to stop the defect area. Bend and it doesn’t hurt to weave tension.