At present, the standards of all walks of life are getting higher and higher, and people are paying great attention to the difficulty of stain resistance of mechanical equipment. The same is true for conductive tape braiding machines. To create high-quality work, it is very important to pay attention to the treatment of the inner cavity of the spindle holder and the surface of the spindle. The adhesion and entry of any dust, synthetic fibers, or unclean things will aggravate the spindle. The damage will lead to the reduction of service life. I would like to suggest the following:
- It is forbidden to sprinkle dusty substances near the spindles of conductive tape in high-speed braiding machines, such as using light calcium powder to absorb oil leaks and oil splashes.
- Pull out the spindle rod-disc fusion piece of the weaving machine and insert it into the front of the spindle holder. Try to wipe the lower cone of the spindle with a velvet cloth to prevent synthetic fibers, fly flakes, silk waste, and dirt.
- When the spindle holder of the conductive tape braiding machine is stored or installed on the vehicle, when the spindle rod-disk fusion piece is not inserted, clear plastic film should be used to cover part of the roller bearing hole of the spindle holder to prevent dust, flowers from flying, and dirt from falling into the spindle holder. cavity.
- The conductive tape high-speed braiding machine carefully performs the “three concentric” work of spindle, steel collar, and yarn guide hook.
The spindle of the conductive tape high-speed braiding machine is installed in the rib hole. In addition to the vertical direction and reliable positioning, the spindle rotation dividing line, the ring management method, and the yarn guide hook management center are required to be concentric, also known as the “three concentric” (If a balloon ring is installed, it will be “four concentric”). Doing this kind of work is key to stabilizing the cotton yarn’s endurance, maintaining a normal balloon shape, stabilizing the spindle vibration, reducing breakage, reducing wefts, and improving the quality of the yarn. It should be done as carefully and carefully as possible. If one of the spindle, steel ring, and yarn guide hook is not concentric, the spindle will have a crooked spindle and a crooked balloon. The cotton textile will have uneven bearing capacity, will feel dizzy, the spindle will vibrate intensified, and the weft yarn will become obvious. Improvement, yarn quality decreases.