At present, the standards of all walks of life are getting higher and higher, and many people are paying great attention to the difficulty of contamination resistance of machinery and equipment. The same is true for conductive tape knitting machines. To create high-quality work, it is very important to pay attention to the cleaning of the inner cavity of the spindle holder and the surface of the spindle. The adhesion and entry of any dust, synthetic fibers, or unclean things will aggravate the spindle. Damage will lead to a reduction in service life. I want to advise everyone.
- A conductive tape knitting machine is forbidden to sprinkle dusty substances near the spindle, such as using light calcium powder to absorb oil leakage and oil splashing.
- Pull out the spindle rod-disc fusion piece of the knitting machine and insert the spindle holder into the front again. Try to wipe the lower cone of the spindle with a velvet cloth to prevent synthetic fibers from being sent away, flying flowers, silk waste, and dirt.
- The spindle base of the conductive belt braiding machine is stored or installed on the vehicle. When the fusion piece of the spindle rod and disk is not inserted, the clear plastic film should be used to cover the part of the roller-bearing hole of the spindle base to prevent dust, flowers, and dirt from falling into the spindle base. cavity.
- The conductive belt knitting machine carefully and carefully does the work of the “three concentric” spindles, steel collars, and yarn guide hooks.
The spindle of the conductive tape knitting machine is installed in the rib hole. In addition, the tangential direction is vertical and the positioning is reliable. At the same time, the spindle rotation dividing line, the steel ring management method, and the yarn guide hook management method are all concentric, also known as “three concentric” (If the balloon ring is installed, it will be “four concentric”). Doing this kind of work well is the key to stabilizing the cotton yarn, maintaining a normal balloon shape, stabilizing the spindle vibration, reducing breakage, reducing hairiness, and improving the quality of the yarn. Do it as carefully as possible. If one of the spindles, steel collars, and yarn guide hooks is not concentric, the spindle will have crooked spindles, crooked air circles, uneven cotton bearing force, dizziness, increased spindle vibration, and significantly increased hairiness. , the yarn quality is reduced.