The ropes you see in daily life are made with high-speed braiding machines. The structural characteristics of the ropes include cumbersome protective sheaths, but the structure of the cables only has electrical conductors and insulating sleeves. The pressure rod sponge is braided by a braiding machine. Indispensable prefabricated components will age after long-term use. Do you know how to replace the pin strip sponge?
- Look for the needle strip sponge on the side of the high-speed braiding machine, and push it in with a gel pen, screwdriver, etc. Use the handle on the other side of the device to pull out the needle lever that has already been pushed out.
- Use the blade of a knife to scrape away the aged sponge, making it as clean as possible. Can still be used. Drivers will chip away at the remaining aged sponge.
- Clean well.
- Take out the reserved sponge and choose a sponge with good toughness.
- Laser cut sponge.
- Apply superglue to the inside of the cleaned pressure bar.
- Place the cut sponge into the slot of the high-speed braiding machine.
- Adhere the lining with non-proof fabric (single layer of adhesive) and cut the strips as needed.
- Iron it and remove the excess non-proof cloth rod to complete the replacement process.
Xuzhou Qixing Machinery Co., Ltd. pointed out that when making materials for braiding machines, various product specifications often have relative material restrictions. High-speed braiding machines do not only use steel raw materials. General stainless steel braiding machines, stainless steel wire, stainless steel wire, and general stainless steel wire can also be hand-knitted. When the customer chooses a steel knitting machine and wants to turn other raw materials into hand-knitted layers, he or she can contact the knitting machine manufacturer in advance to discuss relevant technical adjustments.