When we use the braiding machine to braid cables, some common faults may occur. When problems occur, we should deal with them rationally. Therefore, it is very necessary for us to understand some common faults of the braiding machine. Today we will Here I would like to share with you, how to deal with the situation when the braiding machine stops during the process of braiding cables.
If the equipment suddenly stops during the knitting process, it is due to disconnection or the thread has been used up. After taking appropriate measures, you can start knitting again.
During the weaving process, if you find that the woven screen layer does not meet the requirements, you should stop the machine at any time and at the same time turn the motor over to eliminate the weaving of the wires at this distance. After the treatment is completed, resume weaving.
Strictly implement the requirements of the process cards sent to the workshop equipment, control the main parameters of the processing process, and keep inspection records.
A complete wire reel requires one end. If there is a connector inside that needs to be broken, a 30cm long woven cloth strip must be tied in the middle of the mark to indicate the reason and the length of the first half. For example, there are several sizes in a reel. When the models are put together, the product specifications, specifications, models, and length should be indicated from the inside out.
The lines must be neat and tight, and there must be no cross-over conditions.
Strictly implement the requirements of the process cards sent to the workshop equipment, control the main parameters of the processing process, and keep inspection records.
Cables are the main medium for producing and consuming electricity in our daily lives. They play a very important role in the formation and use of power grids. Only by doing a good job in quality control of braiding machines in cable production can we produce high-quality products. Reduce unnecessary damage in the mid and late stages.