High-speed braiding machines a common mechanical equipment, but they also often suffer from some common faults. How to eliminate these common faults is very critical. Below, Xuzhou Qixing Machinery Co., Ltd. will introduce in detail the common faults of high-speed knitting machines and their troubleshooting methods, hoping to be helpful to everyone.
一、Why can’t the machine turn on?
- It may be a power failure. Check whether the power cord is plugged in tightly and whether there is power. If there is a problem, you can replace the power cord or check the power plug.
- The panel switch may be damaged and needs to be replaced.
- The motor may be damaged and needs to be replaced.
二、Why can’t the high-speed braiding machine knit normally?
- Check the knitting needles and braiding machinery gears for wear. If worn, they need to be replaced.
- Check whether the knitting needle is too long or too short and adjust the length of the knitting needle.
- Check the verticality of the knitting needle. If it is incorrect, adjust the verticality of the knitting needle.
三、How can loose fabric appear on a high-speed braiding machine?
- Check whether the take-up device of the high-speed braiding machine is normal, and place filter paper and other materials around the take-up device so that the fabric can be caught in the net.
- Adjust the fabric tightness of the high-speed braiding machine to ensure that the fabric does not loosen during the weaving process.
四、Why does a high-speed braiding machine experience machine vibration?
- Check whether the rotating shaft and transmission device of the high-speed braiding machine are damaged. If any damage is found, they need to be replaced in time.
- Check whether the work surface of the high-speed braiding machine is flat. If it is not flat, it needs to be adjusted.
- Check whether the anti-shock device of the high-speed braiding machine is intact. If it is not intact, it needs to be updated.
The above is an introduction to common faults of high-speed braiding machines and their troubleshooting methods. We should pay close attention to the maintenance of high-speed braiding machines and repair faults in time to ensure the normal operation of the equipment. At the same time, learning about high-speed braiding machines should also be strengthened to improve work efficiency and ensure the stability of the production line.