In the current social and economic development, braiding machines are used more and more widely, so the performance requirements of Xuzhou knitting machines are getting higher and higher. In the braiding machine, the needle selector must be used to promote the operation of the knitting needles. A good needle selector can perform needle-pushing work more efficiently.
The current needle selector of braiding machines is generally maintained by dragging the needle groove body. The firmness of its own fixation cannot be guaranteed and it can easily slip out of the needle groove.
The needle selector is built inside the needle groove on the needle plate. Its front end is designed to promote the forward movement of the knitting needle. Its characteristic is that it includes itself. The braiding machine itself is divided into a needle barrel, a shaft, and a needle tail. The bottom of the needle tail There is a stopper, a belt groove is provided inside the needle groove, a protrusion is provided at the joint between the needle tail and the shaft, several needle bells are provided on the shaft, and the push needle barrel is provided with a protrusion. There is a protrusion. The tail of the push needle barrel is provided with an annular protrusion. Both sides of the push needle barrel are provided with fixing protrusions. The inner surface of the above-mentioned needle groove is provided with a fixing recess. The above-mentioned fixing protrusion is built on the above-mentioned fixing protrusion. inside the dimple and drag it around.
The needle selector of the braiding machine is built inside the needle groove on the needle plate. The front end of the knitting needle moves forward, including itself. The above itself is divided into a needle barrel, a shaft, and a needle tail. There is a needle under the needle tail. Stopper, the inside of the above-mentioned needle groove is provided with a groove, the above-mentioned joint of the above-mentioned needle tail and the above-mentioned shaft is provided with a protrusion, the above-mentioned shaft is provided with several needle bells, the above-mentioned push needle barrel is provided with a protrusion The tail of the above-mentioned push needle barrel is provided with an annular protrusion, and both sides of the above-mentioned push needle barrel are provided with fixed protrusions. The inner surface of the above-mentioned needle groove of the Xuzhou braiding machine is provided with fixed pits, and the above-mentioned fixed protrusions are built on The above fixes the inside of the pit and drags it around.
The above is the introduction of the needle selection plate manufacturing technology of braiding machines brought to you by the editor. I hope it can be helpful to you.