High-speed knitting machines are mainly used for knitting equipment. Due to the continuous rapid development of society and the continuous development of science and technology, the performance of the equipment is constantly improving, and the use experience is also more significant; now everyone has requirements for various chemical substances It is getting higher and higher, which also makes it difficult for the original machinery and equipment to meet the requirements of the public. Nowadays, high-speed knitting and looms have high working efficiency, stable operation, and very long use time. Xuzhou Qixing Machinery Co., Ltd. will tell you below to Introduce the maintenance procedures of high-speed knitting and looms.
- Check whether the lubrication in the main chassis of the knitting machine is within the required range. Please take out the oil probe and lower it to ensure the remaining oil is between the two lines, but not too much to prevent the lubricating oil from spraying.
- The knitting machine checks the turbine box lubricating oil, which can be estimated by the oil mirror. If the lubricating oil is less than half of the oil mirror, the lubricating oil must be replenished.
- The centrifugal impeller and pivot part of the knitting machine should be lubricated and the cabinet countertop should be wiped clean at the start of each shift to prevent dirt from blocking the spindle.
- All gear shaft parts of the knitting machine should be properly lubricated and maintained.
- Carry out appropriate lubrication and maintenance on the polished rod part of the knitting machine glossy cable arbor moon.
- There must be no obstructions within the position range of the knitting machine equipment.
- Tighten the screws in the drive system and connection parts of the knitting machine to prevent loosening from affecting the operation of the equipment.
- Before the actual operation of the knitting machine, it should be run at a low speed for about 5 minutes and then increase the speed.