The knitting machine is the equipment used for weaving. Due to the continuous and rapid development of society and the continuous development of science and technology, the performance of the equipment is constantly improving, and the use effect is more obvious; Nowadays, people’s requirements for various materials are getting higher and higher, which has also led to the fact that the original equipment is difficult to meet people’s requirements. The current knitting machine works with high efficiency, stable operation, and a very long use time. The following is for everyone. Introduce the maintenance process of the knitting machine.
- Check whether the lubrication in the knitting machine case is within the specified range, pick up the oil probe and drop it to ensure that the oil is in the center of the two lines, but not too much to avoid spraying out the lubricating oil.
- The knitting machine checks the lubricating oil of the turbine box, which can be visually inspected by the oil mirror, and the lubricating oil needs to be replenished when it is lower than half of the oil mirror.
- The impeller and shaft center of the braiding machine should be lubricated before starting each shift and the table should be wiped clean to prevent foreign matter from jamming the spinning spindle.
- All transmission gear parts of the knitting machine should be properly lubricated and maintained.
- Lubricate and maintain the light pole of the light sensor of the knitting machine properly.
- It must be confirmed that there are no obstacles within the movement range of the knitting machine table.
- Tighten the screws of the transmission part and connection part of the knitting machine so as not to loosen and affect the operation of the machine.
- Before operating the knitting machine, please run at a low speed for about 5 minutes before increasing the speed.
High-speed knitting machine features:
- Frequency conversion stepless speed regulation, sensitive parking when yarn breakage, synchronous feeding of core spun yarn, control of core spun yarn breakage, low energy consumption, and high output.
- The surface of the machine is made of special ingredients, which improves the wear resistance, and the key parts are processed by special heat treatment and ultra-finishing, so the service life is long.
- The machine has high operating stability, easy maintenance, and simple operation.
- Small footprint, saving space.
- The operation of the electrical box panel is simple and easy to understand.
- Wire materials: stainless steel wire, copper wire, tinned wire, enameled wire, nickel-plated wire, nylon wire, carbon fiber, cotton yarn and other materials.