Nowadays, the level of various fields is improving day by day, and the problem of environmental pollution resistance of equipment has also attracted the attention of many people. The nylon fabrics produced by high-speed braiding machines have replaced the reputation of ordinary hand-made textiles. Hand-made textiles are difficult, the human resources are optimized, the material resources are exhausted, and the driving force is insufficient. Weaving equipment that works 24 hours a day can produce hand-made textile machines that can process dozens or even dozens of times.
The high-speed braiding machine has not knitted the warp beam but needs to wait for more than one week (more than one week) to ensure that everything is normal and smooth when the high-speed knitting machine is restarted. The following important tasks must be done well question:
High-speed braiding machine shutdown equipment is an important work and key point in the operation process.
- When shutting down the equipment of the stainless steel mesh weaving machine, it must first be woven into yarn-dyed fabric to prevent moisture and mold from being left in the machine for a long time.
- Use drinking water to clean the accumulated slurry on the steel plates and heads, and try to clean them as neatly as possible to lay the foundation for restarting the machine later.
- The warp threads are relieved of stress and obtained with a heavy hammer, and the head frame is shaken into a flush state to avoid long-term opening of the mouth to stretch the warp threads.
- Place the baffle on the loom and learn to drop the waterproof cover.
- Extend the weft-pressing wheel reduction motor outward to prevent the weft-pressing wheel from deforming.
- Disconnect the power supply circuit of the mechanical equipment of the stainless steel mesh weaving machine and disconnect the water source to ensure safety and energy conservation.
- Remove the circuit board from the electrical box and store it in a ventilated and dry area to prevent moisture from affecting its function.
For example, all high-speed braiding machines in a certain workshop must be shut down, the main power supply, and the main water source, ventilated on time, dehumidification inspections, and the workshop ventilated and dry.