When the braiding machine is used, major problems of one kind or another often occur. The braiding machine manufacturer summarizes the common problems and solutions that may occur during the operation of the braiding machine:
一、The density of the braid layer does not meet the requirements
Since the braiding density is related to the number of braiding spindles, the number of monosulfides per spindle, the outer diameter, pitch, and the nuclear braiding angle, the number of spindles, the number of broken spindles, and the hole diameter always remain unchanged. The more pitch braiding angles, the smaller the braiding density. Check the braiding pitch and braiding angle. If it is not good, adjust it immediately. If there are roots, missing strands, and small holes, they should be repaired or removed immediately. Keep the number of spindles, root type and hole diameter, braiding pitch, and braiding angle in harmony with each other.
二、The density of the braid is uneven and the strands are unevenly tight.
The braiding machine strand tension is out of control. The braiding machine manufacturer kindly reminds you that if the plastic elasticity is lost due to fatigue due to long-term use, the tension of each strand must be adjusted at this time.
三、Uneven braiding pitch
Too few turns of the cable on the traction sheave will lead to unstable matching between the drag motor rotor transmission ratio and the traction rope spiral cable. Properly increase the number of turns of the cable on the traction sheave and adjust the speed between the two to stabilize the braid. There are holes and threads in the braid. The strands are broken, the tension control of the changing lane is uneven, the winding wires are piled up and cross-pressed, the changing lane arrangement is uneven, the motor rotor tension is not adjusted evenly, and the wire strands are not tight or loose.
四、When the strand is broken, the maintenance method is improper.
Adopting a high-frequency speed regulator, 220V/380V working standard voltage, and low energy consumption motor, the knitting machine manufacturer adjusts the operating speed according to the production characteristics of the product and installs a copper core cable box and pure cotton yarn automatic stop machine equipment, which is effective Reduce product quotation rate and greatly save space, design human resources management, and configure core wrapping synchronous feeding, making the operation process simpler and maintenance faster.