Nowadays, high-speed knitting machines have been successfully used in many places, usually professionally used for weaving clothing, but it is worth mentioning that, after a long period of use, there will inevitably be some damage or failure, so do a good job every day Some major and minor repairs are necessary, and there are some important aspects that we need to keep in mind.
During overhaul, all mechanical parts should be disassembled, thoroughly cleaned, repaired damaged parts, removed parts beyond the service life, and then carried out all-around assembly and adjustment according to overhaul regulations. Overhaul is usually performed when the large circular knitting machine is running normally. It took about 96 months to develop.
At the same time, the main purpose of key maintenance is to eliminate the dust and flying flowers on various parts of the mechanical equipment, clean up the knitting parts and replace the damaged knitting, etc. The large circular knitting machine mainly knitting cotton yarn is in normal operation for 6 months Every month, critical repairs to the machine’s braided components are required.
The knitting speed of the knitting machine is an important parameter that customers are very concerned about. For knitting machines with the same performance specifications, of course, the faster the knitting speed, the better. Let us take a look at the speed of general high-speed knitting machines What are the key factors?
- Speed ratio: The speed ratio of the knitting machine is getting faster and faster, and the number of weaving turns per unit of time is getting faster and faster. Of course, the knitting speed is getting faster and faster. The reason for limiting this speed at this stage is the quality of the motor and the performance of the weaving raw material. relevant.
- Pitch: The larger the pitch between the braided layers, the smaller the number of braided overlapping layers per unit length, and the faster the speed. In order to ensure the quality of the braided plastic hose, it is necessary to ensure the pitch in the middle of the braided layer. The smaller the pitch, the denser the braided layer, the better the performance of the braided tube.
- Management: Under the same weaving quality requirements, the larger the pipe diameter, the faster the weaving speed; when you buy a weaving machine, you can not only look at the weaving speed of the weaving machine but also the weaving quality, only high efficiency, and quality A knitting machine with both is a good knitting machine in our mind.