Ribbons have been widely used in many industries. As the application scope of ribbons continues to expand, the types of ribbons are becoming more and more diverse. Ribbon machines can be used to hand-knit various ring-shaped or flat inelastic ribbons. And elastic cords, there are countless kinds of webbings available in the consumer market. The following ribbon machine manufacturers will introduce to you the characteristics of ribbon products.
Polyester:
- Strong wear resistance.
- The water absorption capacity is poor, and the moisture resistance of the official website is 0.4% (20℃, relative air humidity 65%, 100g polyester absorbent 0.4g).
- It is easy to cause tip discharge and pilling.
- Acid or alkaline. The Xuzhou ribbon loom manufacturer pays great attention to the fact that alkali with a certain concentration will damage the surface of the fabric at a certain temperature, making the fabric feel soft.
- Corrosion resistance and light resistance are very good.
- Polyester fiber fabric is not easy to wrinkle, has good dimensional stability, and is easy to clean and dry.
Polyester textile:
- FDY (filament): Single fiber vertical surface lubrication, sub-large brightness, bright, semi-gloss, extinction, saturation is getting weaker and weaker.
- DTY (ductile yarn): metal drawing is difficult, low expansion, and loose.
- DTY network cable (low plasticity network cable): There are each network point, plus cluster capacity in the middle of the optical fiber (no network, light network, in network, heavy network, can be used for heavy network thick wire).
Ribbon loom manufacturers must make certain adjustments or distortions when using FDY and DTY under normal circumstances.
Limitations: Plus the tensile strength of silk; the fibers must stay together. The surface of the chemical fiber is lubricated, which is convenient for hand knitting.
Twisting: coupled with tensile strength; coupled with the adhesion in the middle of the fiber. The fabric of the webbing manufacturer has a wrinkle effect.