Speaking of ribbon looms, this is only available in modern times with the development of the economy and society. In ancient times, although everyone’s ribbon loom was also application equipment, the equipment before it was relatively simple, the quality of the woven cloth was relatively rough and the style was relatively simple. Generally, it was hand-woven. However, with the development of the economy and society, the ribbon loom has also achieved rapid development.
From the initial development of the ribbon loom to the current ribbon loom, a total of three development stages have passed:
The first stage is the self-employed generation. The ribbon loom at this stage is mainly based on the traditional weft density + industrial touch screen, which belongs to economic development equipment.
The second stage is the traditional second generation. Compared with the first generation, the ribbon weaving machine at this stage has further development. The key is the fully automatic weft density + industrial touch screen, which belongs to the upgraded equipment.
The third stage is more than three generations. Compared with the previous two times, the ribbon loom at this stage has a qualitative leap. It mainly adopts the method of automatic weft density + inductive touch screen, which is a special configuration. For example, the high-speed ribbon looms used by manufacturers today.
The weaving speed of the ribbon loom is a parameter that customers are very concerned about. For a weaving machine with the same performance specification, of course, the faster the weaving speed, the better.
- Speed ratio: The faster the speed ratio of the ribbon loom, the faster the number of weaving circles per unit time. Of course, the weaving speed will be faster and faster. The reason for limiting this speed at this stage is related to the quality of the motor and the performance of weaving raw materials.
- Pitch diameter: The larger the pitch diameter between the braided layers, the smaller the number of braided overlapping layers per unit length, and the faster the speed. In order to ensure the quality of the braided plastic hose, it is necessary to ensure that the pitch diameter in the middle of the braided layer is The smaller the pitch, the denser the braided layer and the better the performance of the braided tube.
- Management: Under the same weaving quality requirements, the larger the tube diameter, the faster the weaving speed.
Therefore, when we buy a weaving machine, we can not only look at the weaving speed of the weaving machine but also need to look at the weaving quality. Only a weaving machine with both high efficiency and quality is considered a good weaving machine in everyone’s mind.