High-speed braiding machines are mainly used in knitting industries such as knitting rubber hose bodies, rubber and plastic insulation panels, and pipe body protective layers. What are the specific structural features of its high-speed braiding machine? I will briefly introduce them to us below.
- The BJZ series product rigid wire braiding machine is a high-speed braiding machine independently developed and designed by our company.
- The remote server has a high-speed ratio, which improves the efficiency by more than 1 times compared with ordinary rigid wire braiding machines. The actual operation is simple and high-precision.
- All remote servers use mechanical automation, PLC + industrial touch screen, and a stepper motor to drive the motor. The weaving precision is greatly improved and the operator’s control difficulty is reduced.
- The fully enclosed structure reduces machinery and equipment noise and enhances employee safety.
- The large space winding drum saves wire consumption and reduces the frequency of wire changing, improving work efficiency.
- No middle glue stops the alarm function, disconnection stops the alarm function.
- Fixed length knitting function.
- Fault testing function.
- Three-color alarm reminder.
During rough adjustment, put the spindle on the two adjacent outer spindle supports, guide the braided wire to the braiding point according to the swing rod, and stack it tightly. When the braided wire enters or exits the slot on the sliding wheel track, its distance to the edge of the upper spindle sliding frame must be basically the same.
The distance adjustment can be accomplished by switching the gear rack forward or backward by one or more gears. If the correct adjustment distance cannot be achieved by moving one tooth, you can adjust it according to the following steps: loosen the five fixing screws on the internal gear. Since the buried hole is oval, the sliding frame can be completed by moving the internal gear. Adjust and tighten the screws after adjusting in time. Place the other sliding frames evenly on the sliding ring rail. If the swing heights of the braided wires are different after the new swing bar is assembled, it should be adjusted so that all the swing bars have the same endpoint.