Various difficulties often occur during the use of the equipment. The horizontal braiding machine manufacturer summarizes the common problems and solutions that may occur during the operation of the braiding machine:
一、The relative density of the braided layer does not meet the requirements.
Since the braiding density is related to the number of braiding spindles, the number of single weights per spindle, diameter, pitch, and braiding angle, the number of spindles, the number of single sulfur in spindles, and the straight scale remain unchanged. The larger the pitch braiding angle, the lower the braiding density. Check the braiding pitch and braiding angle. If it is not good, adjust it immediately. If there are roots, missing strands, and small diameters, they should be repaired or removed immediately. Keep the number of spindles, root type, diameter braiding pitch, and the fixed braiding angle consistent with each other.
二、The relative density of the braided layer is uneven and the strands are unevenly tight.
The tension of the strands of the braiding machine is not controlled. The horizontal knitting machine manufacturer recommends that if the plastic elasticity is lost due to fatigue due to long-term use, the tension of each strand needs to be adjusted at this time.
三、The weaving pitch is uneven.
Too few electromagnetic coils of cables on the traction sheave lead to unstable matching between the drag spindle transmission ratio and the traction rope harness. Increase the number of turns of the cable on the traction sheave appropriately and adjust the speed between the two to stabilize the braid. There are holes and wires in the braid. The strands are broken, the tension control of the changing lane is uneven, the winding wire is piled up and crosses the line, the changing lane arrangement is uneven, the spindle tension is not adjusted evenly, and the thread strands are not tight or loose.
四、When the strands break, the repair method is poor.
Adjust the tension of the steel nails after adjusting the thread tension.
The horizontal braiding machine manufacturer adopts the principle of a high-frequency variable speed regulator, 220V/380V working standard voltage, and low energy consumption motor. The horizontal braiding machine manufacturer adjusts the operating speed according to the manufacturing characteristics of the product and assembles a pure copper core cable box. The cotton yarn automatically stops the machine and equipment, which effectively reduces the product return rate and saves a lot of space. Designed for human resource management, it is equipped with synchronous feeding of the core, which makes the operation process simpler and maintenance more convenient and faster.