The braiding machine often breaks wires during operation. It is necessary to distinguish whether it is torn or stuck. If it is torn, the reason is that the tension is too high. You can adjust the tension or remove the elastic. If it is caused by jamming because the spring is too small, the tension should be increased immediately, and you must carefully check whether the upper and lower grips are normal. If there is any damage, you can carefully remove it and use polishing sandpaper to smooth the wound shape and install it.
Xuzhou Qixing Machinery Co., Ltd. pointed out that when the machine cannot be started normally, you must first self-check whether there is any wire entanglement on the parking pole behind the machine, whether the power switch is turned off and everything is normal, and you can fix it.
If you still cannot start the machine normally due to the above common problems, please get in touch with the team leader immediately, explain the reason, discuss the solution with the mechanic, and make a record for the next repair and maintenance. The braiding machine should be refueled every 30 minutes during normal operation. Oil should be applied immediately after each line is completed.
If one of the groups often breaks during operation, you should check whether the porcelain eyes in the tension seat are damaged, adjust the tension, and check whether the surface of the twisted rope machine braiding machine is damaged or uneven and whether there are gaps, causing damage to the knitting machine equipment. Just add engine oil to the external dirt, but it cannot be forced to start.