A high-speed braiding machine is a machine used for manufacturing textiles. Nowadays, high-speed braiding machines are widely used in the textile industry, but various problems may be encountered during use. Below I will introduce some common problems and solutions to the use of high-speed braiding machines.
The speed of the braiding machine is slow: Xuzhou Qixing Machinery Co., Ltd. introduced that the high-speed braiding machine should maintain high speed when working, but sometimes the problem of slow speed occurs. This may be caused by too many cables, excessive machine load, wear of the guide rails, etc. The solution is to clean the cables in time, reduce the load, and lubricate and replace the guide rails.
Knitting machine cannot start: Sometimes the braiding machine cannot start normally, which may be caused by power failure, circuit failure or operation error. The solution is to check whether the power supply is normal, confirm whether the circuit connection is correct, carefully read the user manual, and follow the operating steps.
Poor quality of knitted products: The quality of knitted products produced by high-speed braiding machines is very important, but sometimes poor quality occurs, such as broken wires, misalignment, and other problems. This may be caused by improper machine adjustment, loom malfunction, poor wire quality, etc. The solution is to adjust the parameters of the braiding machine, check the failure of the weaving machine and repair it in time, and select good quality wire.
Knitting machines are noisy: high-speed braiding machines will produce a certain amount of noise when working, but excessive noise will affect the working environment and the health of operators. This may be caused by loose machine parts, worn parts, etc. The solution is to promptly check the parts of the machine, tighten loose parts, and replace worn parts.
Excessive deviation of the braiding machine: The high-speed braiding machine should maintain a good knitting deviation when working, but sometimes the problem of excessive deviation may occur. This may be caused by improper machine adjustment, guide rail wear, transmission failure, etc. The solution is to adjust the parameters of the braiding machine and replace worn guide rails and failed transmission devices.
Frequent failures of braiding machines: High-speed braiding machines may encounter various failures during use, and frequent failures will lead to low production efficiency. This may be caused by machine quality problems, improper maintenance, etc. The solution is to purchase a good quality braiding machine, maintain the machine regularly, and repair faults in a timely manner.
The braiding machine generates heat when working for a long time: The high-speed braiding machine will generate a certain amount of heat when working, but overheating when working for a long time will affect the life and working efficiency of the machine. This may be caused by overloading the machine, poor cooling system, etc. The solution is to reduce the load on the machine, increase ventilation of the cooling system, and ensure the normal operating temperature of the machine.
To sum up, high-speed braiding machines may encounter problems such as slow speed, inability to start, poor quality, loud noise, excessive deviation, frequent failures, and heat during long-term operation. Solving these problems requires operators to have certain technical knowledge and experience, and to regularly inspect and maintain equipment and handle faults in a timely manner. Only by ensuring the normal operation of high-speed braiding machines can production efficiency and product quality be improved.
