During the use of the equipment, have you found that even if the rope braiding machine is not easy to use after lubrication and maintenance, the equipment has not been exposed to moisture and rust, but it has been cleaned and maintained for several months before use? I found that the equipment is very astringent. Even if I use the usual oil lubrication care for the machine head and track, it is still very astringent and not smooth when used. What should I do at this time?
Regularly maintain the rope braiding machine to remove floating hair and oil stains in the machine head. It is more convenient to use a children’s toothbrush. Brush out the floating soft hair and do not let the hair stick to the inside. Normally, we do not need to face the inside of the machine head. Immediately spraying a lot of care on the sewing machine oil covering an area is a key link that makes it difficult for hair to stick to the inside of the machine head.
Spray sewing machine oil on a clean cotton towel, and then use oil paper to remove oil stains on the head of the rope braiding machine to ensure that the head parts feel “moist but not greasy”. The upper and lower rails are all cleaned equally. The expected effect is as shown in the picture (including the head of the auxiliary machine, the cleaning is the same).
Hook off the decorative strip and remove the long hook needle from the common toolbox (as shown in the picture, the common toolboxes of Yindi and Brother’s fully automatic braiding machines are equipped with this long hook needle). Pay attention to the installation of the decorative strip. On both sides, turn the hook head upward and go deep under the edge of the decorative strip. Slowly drag out the decorative strip (either from the left or the right).
Regularly maintain the rope knitting machine to remove floating hair and oil stains on the needle. You can remove the needle, spray sewing machine oil on the needle to clean it, and then clean it until it becomes lubricated and slippery or slightly oily.
The track of the machining center is an area with high friction of the cable braiding machine, and it is a top priority for daily cleaning and maintenance. Use clean oil paper sprayed with sewing machine oil to clean the track again to avoid the occurrence of black oil drying and hard dirt. If the machinery and equipment are not lubricated, clean, and tidy, hand knitting cannot be smooth and unrestrained. Don’t be arrogant in victory and don’t be discouraged in defeat. When sharpening your knife, don’t chop wood. Please pay attention to the cleaning, maintenance, and repair of machinery and equipment. If you plan to place it in one end of the room and then take it out for use, you still need to complete the equipment.
Based on the design of a cable braiding machine with guardrails on the track, the design of guardrails is designed to work with various other attached machine heads to intelligently expand the use of hand knitting. When cleaning, be careful not to rub black oil into the gaps to ensure that clean oil is on the machine head and rails, ensuring the desired effect of being moist but not greasy.